Hard and tough resin 705A
Name: hard and tough 3D printing photosensitive resin
Model: 705A
Color: opaque white
Packaging: barrel
Specification: 5 kg / 10 kg / 20 kg
light source:SLA 355nm large size
3D printing Hard and tough UV resin
product details
It is a bisphenol resin, resistant to general temperature, tappable, a kind of PP photosensitive resin specially developed for SLA industrial machinery, which can be made into durable, tough and waterproof functional parts.
Applicable printers: Suitable for industrial SLA 3D printers with a wavelength of 355nm.
Applications: Being applied to print, durable, waterproof and low shrinkage engineering parts that can be used to produce aerospace parts, concept models, small production parts, etc.
It is a kind of PP photosensitive resin specially developed for SLA industrial machinery, which can be made into durable, tough and waterproof functional parts. The shrinkage rate is less than or equal to 1% (tolerance is between +-0.03), ensuring that the printed model is consistent with the size of the CAD design. This is a three-dimensional lithography material with good toughness for large-size printing. It can print highly detailed parts. It can be tapped and has excellent elongation at break. The printed model is not easy to break.
The color of liquid resin will not delaminate, change color or agglomerate after long-term storage. The shelf life of the resin is 12 months. The printed model is weather resistant and easy to store. It can be stored in a humid environment, does not absorb moisture, and overcomes the shortcomings of other resins that are easy to be softened by moisture or easily corroded by the environment.
Features
01、PP-like material
A PP photosensitive resin specially developed for SLA industrial machinery to make durable, tough and waterproof functional parts.
02、Low shrinkage rate
Designed to reduce volume shrinkage to ensure that the finished printed model is consistent with the dimensions of the CAD design. Shrinkage rate ≤1% (tolerance between +-0.03)
03、High precision
This is a high toughness 3D printing material developed by DYD, which can print extremely accurate and highly detailed parts.
04、More excellent performance
It can be tapped, and also has excellent elongation at break, the printed model is not easy to pull off, which ensures the success rate of printing.
05、Strong durability
The printed models are durable and easy to store. It can be stored in a humid environment without absorbing moisture, overcoming the shortcomings of other resins that are susceptible to moisture softening or environmental corrosion.
Material property data
PROPERTY | Unit | PROCEDURE | Results |
Viscosity | (cps@25℃) | 280-360 | |
Critical exposure energy | ( mJ/cm2 ) | 8.9-9.5 | |
Tensile Strength | MPa | ASTM D638 | 38-56 |
Tensile modulus | MPa | ASTM D638 | 2,599-2,715 |
Breaking elongation rate | % | ASTM D638 | 8-12 |
Notched impact strength | J/m | ASTM D256 | 33-38 |
Heat distortion temperature | ℃ | ASTM D 648 @66PSI | 38-50 |
Shore hardness | D | 76 |
Notice:
The above values may vary depending on the geometry of the part, printing settings, temperature changes, secondary post-curing, etc. The actual values may vary. Therefore, users must test the product before use to ensure that it can meet your final use of printing performance. Require. The above values are typical values and we do not agree with them as binding material specifications or warranties unless expressly agreed in writing. The final effect depends on the actual usage of the user, this table is for reference only.
instructions
l Caution.
l Shake well before use before pouring into the resin tank.
l This resin cannot be mixed with other resins, liquids, substances, etc., otherwise it will cause printing failure.
l Lower temperature may affect the printing effect, and the resin can be properly preheated before use (not more than 35℃).
l taking care to wear protective gloves and masks and to keep the room ventilated during use.
l this product contains active chemicals, this product avoid contact with eyes, skin and clothing.
l This product is slightly irritating to eyes and skin, if contact with eyes is accidental, please rinse immediately with plenty of water and seek medical attention.
l Please rinse with soap and water immediately after contact with the skin; wash thoroughly after contact with clothing before wearing.
l Avoid contact with children and pregnant women.
Storage and transportation
l Storage and transportation.
l Resin should be stored and transported in its original packaging in a sealed and light-proof environment, avoiding high temperatures and sunlight.
l Recommended storage temperature is 18-35°C.
l Do not mix and store resin left in the resin tank with unused resin after printing. It should be stored in a separate light-proof container.
l For safety information, please refer to the MSDS of this product. if you encounter any problems during use, please feel free to contact us.