Hard and strong resin 707

Hard and strong resin 707

Name:Hard and strong resin

Model: 707

Colour: Flesh-colored

Type of packing: Industrial plastic bucket

Packing specification: 5 kg/10 kg/20 kg

light sourceSLA 355nm large size


3D printing Hard and strong resin

Hard-strong-fine surface-no shrinkage

product details

Name:Dayoude SLA Dental use resin 707

Model: 707

Colour: Flesh-colored

BrandDayoude

UseUsed by surgeons and dental technicians to print 3D dental models, trays and surgical guides.Dental resin, smooth and delicate surface without shrinkage

Type of packing: Industrial plastic bucket

Packing specification: 5 kg/10 kg/20 kg

light sourceSLA 355nm large size


Dayoude develops a resin that can be used for stereolithography (SLA) curing for the specific needs of the dental industry. It is used to print 3D dental molds, trays and surgical guides. The following instructions are specifically for dental professionals, such as dentists, oral and maxillofacial surgeons and dental technicians using this resin to print dental molds, trays and surgical guides.

image

This resin can show high-resolution details, the tip edge accuracy is 10 microns, showing the same structure as the CAD pattern.Thin structures printed with this material are not easy to break when bent. It can be tapped and has excellent elongation at break, and the printed model is not easy to break, ensuring the success rate of printing. Because the toughness of the model is improved in the upgraded formula, the rigidity and toughness of the cured prototype coexist, abrasion resistance and scratch resistance. It is especially suitable for printing dental surgical guides and drilling guides. Using international imported raw materials to improve the performance of the model, it can be stable for a long time even in corrosive media. The resin is stable and will not cause color paste precipitation, discoloration and foaming.


Disinfect

The cured model can be placed in the oral cavity for a short time after disinfection, as an auxiliary tool. It is recommended to use 70% ethanol to sterilize the model. Do not use an autoclave for sterilization.

image

Material property data

 PROPERTY

Unit

PROCEDURE

Results

Viscosity

cps@25℃)


280-420

Critical exposure energy

( mJ/cm2 )


8.1-9.1

Tensile Strength

MPa

ASTM D638

43-60

Tensile modulus

MPa

ASTM D638

2,531~2,688

Breaking elongation rate

%

ASTM D638

7-11

Notched impact strength

J/m

ASTM D256

29-35

Heat distortion temperature

ASTM D 648 @66PSI

70-80

Shore hardness

D


83

Notice

The above values may vary depending on the geometry of the part, printing settings, temperature changes, secondary post-curing, etc. The actual values may vary. Therefore, users must test the product before use to ensure that it can meet your final use of printing performance. Require. The above values are typical values and we do not agree with them as binding material specifications or warranties unless expressly agreed in writing. The final effect depends on the actual usage of the user, this table is for reference only.


instructions

lShake well before use and then pour into resin tank;

lDuring the use, wear protective gloves and keep the room ventilated;

lThis product contains reactive chemicals, avoid contact with eyes, skin and clothing;

lThis product have slight irritation on eyes and skin. If you contact your eyes inadvertently, rinse immediately with plenty of water and seek medical advice in time;

lPlease wash with soapy water immediately after contacting with skin; wash thoroughly after contacting with clothes before wearing;

lKeep the product away from pregnant women and children.

 

Storage and transportation

lThe resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.

lThe recommended temperature is 18-35, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35).

lAfter printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.

lFor safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us. 

image

Send Inquiry to us!

ARE YOU READY FOR AWESOMENESS? CONTACT US NOW!

CONTACT NOW
cache
Processed in 0.005602 Second.