UV resin glue 901

901 SERIES PRODUCT MANUAL

PRODUCT DESCRIPTION：

Introduction: It has the advantages of high transparency, no bubble, fast curing, low shrinkage, yellowing resistance, etc. It can be used for jewelry making, handicraft decoration, casting and coating, casting figurines and making resin paintings. It can also be mixed with mica powder, coloring agent and flashing agent to get colorful appearance.

Name：UV resin drip adhesive 901（UV crystal drip glue）

Model: 901

Color: colorless transparent

Package: Bottle

Specification: 500g/1000g

Applicable light source: 

LED light source wavelength 365nm-405nm nail polish UV lamp.

Applications: 

DIY crystal jewelry, pendant making, surface coating, heat shrinkable sheet, etc.

FEATURES：

01. Highly transparent and yellowing resistant

Using high-quality raw materials, ultra-clear and high transparency, quality like crystal, and yellowing resistance.

02. High hardness

With the characteristics of high hardness and high toughness, the model can be cut, polished and polished, not fragile.

03. Smooth and delicate surface

Based on the upgraded formula developed by our company, the model can show a smooth surface after curing, scratch resistant and fine texture.

04. No air bubbles

901 UV crystal drip adhesive can be cured without static defoaming, and can be defoamed directly in the mold automatically.

05. Low odor

This product uses imported raw materials from Europe, America, Japan and Korea, with low odor stimulation.

EXAMPLE PICTURES：

USAGE：

1. Prepare tools and materials

UV drip glue, mold, color essence, flash powder, UV curing lamp, glue adjusting tools, etc.

2, Drip glue, glue filling

Transparent crystal lighting can be directly drip glue; can be added to the color essence after mixing drip glue, you can also add a small amount of glitter or other fillers, DIY imagination to increase the beauty of the finished product.

3、Elimination of foam

UV drip glue itself no bubble, operation squeeze, shaking, flow, add color essence mixing will inevitably produce bubbles;

Commonly used to debubble: static bubble removal, manual bubble picking, firearm debubble.

4、Curing

Works moved into the UV lamp, then turn on the light, so as not to cause surface microwave pattern; normal 365NM wavelength power 36W UV lamp irradiation curing for about two minutes. Or use the wavelength 365NM -405NM LED dual light source UV lamp, power 40W UV lamp curing.

Note: high power UV lamp curing time is not good to grasp.

5、Finished

UV light off after the general rest put 5-6 minutes, then remove the finished product. Need to fill the glue, and then curing.

STORAGE METHOD：

l Place in a cool and dry place with backlight to prolong the life of the product. Recommended use and storage temperature is 18-25 degrees Celsius.

*.This product manual is for reference only, the specific product content please according to the actual print effect shall prevail.