Elastic resin 609B

3D printing Elastic resin photosensitive resin

Introduction：

3D printing silicone resin is a chemical polymer based on alternating chains of silicon and oxygen atoms in 3D printing as liquid silicone rubber (LSR), which is a highly stable elastomer capable of withstanding extreme temperatures and environments.

Applications：

Seals, gaskets and plugs, prototyping and low volume production of small components for medical devices, connectors, consumer and industrial products Prosthetics, anatomical and medical models, custom wearable devices and ear wear devices.

Applicable printers：

LCD 3D printers and DLP 3D printers with LED light source wavelengths of 365nm-405nm.

Product features：

01、Strong flexibility

Silicone photosensitive resin is easy to bend without breaking, which not only allows it to withstand greater pressure, but also makes it very portable and able to be folded up without any disassembly.

02、Low shrinkage

Specifically designed to reduce volume shrinkage, ensuring dimensional stability of printed models.

03、Smooth and delicate surface

Based on the upgraded formula developed by our company, the silicone resin model can show a smooth surface after curing, and the texture is delicate, no pile of material, no roughness.

04、Thermal stability

Silicone resins can remain temperature stable, so areas inside silicone shielded objects will not feel the effects nearly as quickly as under non-temperature stable materials such as glass.

05、Excellent stability

The liquid resin does not stratify or change color after a long period of time, does not clump, and the printed model is durable, with a 12-month warranty.

06、Strong durability

This resin is easy to store. It can be stored in a humid environment without absorbing moisture and is highly durable.

07、A wide range of practicality

This same property also makes silicone a good radiation shield, and can conduct and insulate, good waterproof and suitable as a seal.

Model pictures:

Material property data：

Note: The above values may vary in actual values depending on part geometry, print settings, temperature variations, secondary post-curing, etc. Therefore, the user must test the product before use to ensure that it will meet your end-use requirements for print performance. The above values are typical values and we do not agree to them as binding material specifications or warranties unless expressly agreed to in writing. Final results depend on the actual use of the user, and this table is for reference only.

Precautions for use：

lThis resin cannot be mixed with other resins, liquids, substances, etc., otherwise it will lead to print failure.

llower temperature may affect the printing effect, the resin can be properly preheated before use (no more than 35℃)

ltaking care to wear protective gloves and masks and to keep the room ventilated during use.

lthis product contains active chemicals, this product avoid contact with eyes, skin and clothing.

lThis product is slightly irritating to eyes and skin, if contact with eyes is accidental, please rinse immediately with plenty of water and seek medical attention promptly.

lPlease rinse with soap and water immediately after contact with the skin; wash thoroughly after contact with clothing before wearing.

lAvoid contact with this product by children and pregnant women.

Storage and transportation：

lResins should be stored and transported in their original packaging in a sealed and light-proof environment, avoiding high temperatures and sunlight.

lThe recommended storage temperature is 18 - 35 °C.

lDo not mix and store the resin left in the resin tank with the unused resin after printing. It should be stored in a separate container protected from light.

lFor safety information, please refer to the MSDS of this product. if you encounter any problems during use, please feel free to contact us.