Hard and brittle resin 708C

Hard and brittle resin 708C

Name:Hard and brittle resin

Model: 708C

Colour: Multiple colors (customizable)

Type of packing: Industrial plastic bucket

Packing specification: 5 kg/10 kg/20 kg

light source:For industrial grade SLA 3D printers with a wavelength of 355nm.


3D printing Hard and brittle uv resin

High temp,no shrinkage, no deformation


product details

Name:Hard and brittle resin

Model: 708C

Colour: Multiple colors (customizable)

BrandDayoude

Type of packing: Industrial plastic bucket

Packing specification: 5 kg/10 kg/20 kg

light sourceFor industrial grade SLA 3D printers with a wavelength of 355nm.


UseHigh-temperature fluid flow analysis, functional prototypes, such as wiring harnesses and support connectors in electronic equipment.

image 

It is a 3D printing photosensitive resin that can be built quickly and is specifically designed to provide high temperature resistance and exceptional surface finishing. Heat deflection temperature of 90-100°C for high temperature and humid environments. Excels in producing highly detailed and extremely precise parts. The material has excellent dimensional stability when exposed to high temperatures and humid environments.

High temperature resin 708C is good at producing highly detailed and extremely accurate parts. When exposed to heat and humidity, the size of the material is stable, which makes it a high-temperature fluid flow analysis, functional prototype, such as wire harnesses and support connectors in electronic devices.

The high temperature resistant resin 708C has a hardness of 92D. It is a hard and high heat resistant material with a shrinkage rate of ≤1% (tolerance between +-0.03).

 

Features

01High hardness

The cured model has a hardness of 92D, which provides excellent hardness and mechanical strength, making it ideal as an industrial part that requires high impact resistance strength.

 

02High temperature resistance

With a heat deflection temperature of 100°C, 708C is a stereolithography material developed specifically for use in environments requiring high thermal stability and humidity.

 

03Low shrinkage

Specifically designed to reduce volume shrinkage, it ensures dimensional stability of the printed model. The finished printed model remains consistent with the dimensions of the CAD design. Shrinkage ≤ 1% (tolerance between +-0.03)

 

04High precision

708C is easy to capture details and can achieve maximum restoration of the design structure, but is not conducive to making thin-walled parts due to its low elongation at break (minimum wall thickness of 1mm is recommended).

 

05Stable performance

The resin is stable under different temperature conditions and is easy to store, and is extremely durable as it does not absorb moisture even when left in a humid environment for a long time.

imageimageimage


Material property data

PROPERTY

Unit

PROCEDURE

Results

Viscosity

cps@25℃


300-450

Critical exposure energy

( mJ/cm2 )


7.6

Tensile Strength

MPa

ASTM D638

60-70

Tensile modulus

MPa

ASTM D638

2866-3170

Breaking elongation rate

%

ASTM D638

4-8

Notched impact strength

J/m

ASTM D256

18-30

Heat distortion temperature

ASTM D 648 @66PSI

90-100

Shore hardness

D


92

Notice

The above values may vary depending on the geometry of the part, printing settings, temperature changes, secondary post-curing, etc. The actual values may vary. Therefore, users must test the product before use to ensure that it can meet your final use of printing performance. Require. The above values are typical values and we do not agree with them as binding material specifications or warranties unless expressly agreed in writing. The final effect depends on the actual usage of the user, this table is for reference only.


instructions

lShake well before use and then pour into resin tank;

lDuring the use, wear protective gloves and keep the room ventilated;

lThis product contains reactive chemicals, avoid contact with eyes, skin and clothing;

lThis product have slight irritation on eyes and skin. If you contact your eyes inadvertently, rinse immediately with plenty of water and seek medical advice in time;

lPlease wash with soapy water immediately after contacting with skin; wash thoroughly after contacting with clothes before wearing;

lKeep the product away from pregnant women and children.


Storage and transportation

lThe resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.

lThe recommended temperature is 18-35℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃).

lAfter printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.

lFor safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us. 

Send Inquiry to us!

ARE YOU READY FOR AWESOMENESS? CONTACT US NOW!

CONTACT NOW
cache
Processed in 0.005560 Second.