Hard and tough resin 703A

3D printing Hard and tough UV RESIN 703A

PRODUCTS：

In order to meet the specific needs of shoe manufacturers, Dayoude develops a resin for stereolithography (SLA) curing that can meet shoe materials. It has excellent hardness and toughness, and excellent precision can form sharp features, thereby creating delicate sole pattern characteristics.

In order to improve the weather resistance of the shoe mold, the heat distortion temperature of the material reaches 68°C.At the same time, it combines dimensional stability and a smooth and delicate surface. This material has a Shore hardness of 80D and can be tapped to facilitate later processing.

FEATURES：

01、Low shrinkage

Shoe mold photosensitive resin 703A is designed to reduce volume shrinkage, ensuring that the finished printed model remains consistent with the dimensions of the CAD design. Shrinkage ≤1% (tolerance between +-0.03)

02、High precision

This is a 3D printing material developed by DareGlobal specifically for the shoe mold making industry, capable of printing angular, highly detailed shoe sole patterns.

03、Stiffness and balance coexist

Shoe mold photosensitive resin type 703A should be required by the different nature of the shoe industry, and the finished print has excellent hardness and toughness, with hardness up to 80D, and can be tapped.

04、Smooth surface

Shoe mold photosensitive resin type 703A prints out smooth surface of shoe mold with fine details and no pile material, which is convenient for later processing.

05、Good stability

The color of the liquid resin will not delaminate, change color or clump after long-term storage. The shelf life of the resin is 12 months.

06、Good temperature resistance

In order to enhance the weather resistance of the shoe mold, the material has a heat deflection temperature of 68℃, which can be applied to activities with high temperature environment.

 TECHNICAL PARAMETERS:

Notice：

The above values may vary depending on the geometry of the part, printing settings, temperature changes, secondary post-curing, etc. The actual values may vary. Therefore, users must test the product before use to ensure that it can meet your final use of printing performance. Require. The above values are typical values and we do not agree with them as binding material specifications or warranties unless expressly agreed in writing. The final effect depends on the actual usage of the user, this table is for reference only.

instructions：

l Shake well before use and then pour into resin tank;

l During the use, wear protective gloves and keep the room ventilated;

l This product contains reactive chemicals, avoid contact with eyes, skin and clothing;

l This product have slight irritation on eyes and skin. If you contact your eyes inadvertently, rinse immediately with plenty of water and seek medical advice in time;

l Please wash with soapy water immediately after contacting with skin; wash thoroughly after contacting with clothes before wearing;

l Keep the product away from pregnant women and children.

STORAGE AND TRANSPORT：

lThe resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.

lThe recommended temperature is 18-35℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃).

lAfter printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.

lFor safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us.