Hard and tough resin 705
Name:Dayoude SLA Bisic resin
Model: 705
Colour: White
Type of packing: Industrial plastic bucket
Packing specification: 5 kg/10 kg/20 kg
light source:SLA 355nm large size
3D printing Hard and tough UV resin
product details
Name:Dayoude SLA Bisic resin
Model: 705
Colour: White
Brand:Dayoude
Type of packing: Industrial plastic bucket
Packing specification: 5 kg/10 kg/20 kg
light source:SLA 355nm large size
Use:It is applied to printed, durable, waterproof and low-shrinkage engineering parts for the production of aerospace parts, concept models, low-volume production parts, and more.
It is a kind of PP photosensitive resin specially developed for SLA industrial machinery, which can be made into durable, tough and waterproof functional parts. The shrinkage rate is less than or equal to 1% (tolerance is between +-0.03), ensuring that the printed model is consistent with the size of the CAD design. This is a three-dimensional lithography material with good toughness for large-size printing. It can print highly detailed parts. It can be tapped and has excellent elongation at break. The printed model is not easy to break.
The color of liquid resin will not delaminate, change color or agglomerate after long-term storage. The shelf life of the resin is 12 months. The printed model is weather resistant and easy to store. It can be stored in a humid environment, does not absorb moisture, and overcomes the shortcomings of other resins that are easy to be softened by moisture or easily corroded by the environment.
Material property data
PROPERTY | Unit | PROCEDURE | Results |
Viscosity | (cps@25℃) | 280-360 | |
Critical exposure energy | ( mJ/cm2 ) | 8.9-9.5 | |
Tensile Strength | MPa | ASTM D638 | 38-56 |
Tensile modulus | MPa | ASTM D638 | 2,591-2,696 |
Breaking elongation rate | % | ASTM D638 | 8-12 |
Notched impact strength | J/m | ASTM D256 | 33-38 |
Heat distortion temperature | ℃ | ASTM D 648 @66PSI | 39-51 |
Shore hardness | D | 76 |
Notice:
The above values may vary depending on the geometry of the part, printing settings, temperature changes, secondary post-curing, etc. The actual values may vary. Therefore, users must test the product before use to ensure that it can meet your final use of printing performance. Require. The above values are typical values and we do not agree with them as binding material specifications or warranties unless expressly agreed in writing. The final effect depends on the actual usage of the user, this table is for reference only.
instructions
lShake well before use and then pour into resin tank;
lDuring the use, wear protective gloves and keep the room ventilated;
lThis product contains reactive chemicals, avoid contact with eyes, skin and clothing;
lThis product have slight irritation on eyes and skin. If you contact your eyes inadvertently, rinse immediately with plenty of water and seek medical advice in time;
lPlease wash with soapy water immediately after contacting with skin; wash thoroughly after contacting with clothes before wearing;
lKeep the product away from pregnant women and children.
Storage and transportation
lThe resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.
lThe recommended temperature is 18-35℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃).
lAfter printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.
lFor safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us.